ER16 A Type Collet Clamping Nut for CNC Milling Chuck Holder Black

Description

ER16 A Type Collet Clamping Nut for CNC Milling Chuck Holder Black
Description
Condition:
100% Brand New & High Quality
Size:
As Picture
Fitment:
For ER collet milling CNC chuck holder.
Specification:
Model:
ER16A
Material:
Carbon steel
Feature:
Hardened and precision ground.
High strength and hardness.
Durable in use.
Mounting and Removing:
1.Place collet into the clamping nut at an angle and turn the nut slightly to engage with the extractor spiral in collet groove. And then push the collet evenly into the nut in the directions of the arrows.
2.The cutter / router bit may be fitted now and the assemblies tightened hard into the chuck body by using a collet wrench.
3.To remove the cutter / router bit, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure.
Please note:
1、Please don't tighten the nut down before insert the cutter / router bit. Or you will damage the collet.
2、You need to tighten the nut down, but not over-tighten. Or you will damage the collet.
Package Include:
1 x ER16A type Clamping Nut
Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much.
If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible.
BBBMT0180
Payment
P
aypal, Visa, and MasterCard are the accepted forms of payment.
Please use the eBay checkout system when paying for your order.
Immediate payment is required for all orders.
Shipping
Items will be shipped out within 72 hours after payment completion. Orders on weekend and holidays will be processed on the next business day.
About us
1. We process and dispatch your purchase within 2 business day after payment clearance.
2.Please contact us if you have special requirements (combination of packaging etc.).
Contact us
If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.
Condition:
100% Brand New & High Quality
Size:
As Picture
Fitment:
For ER collet milling CNC chuck holder.
Specification:
Model:
ER16A
Material:
Carbon steel
Feature:
Hardened and precision ground.
High strength and hardness.
Durable in use.
Mounting and Removing:
1.Place collet into the clamping nut at an angle and turn the nut slightly to engage with the extractor spiral in collet groove. And then push the collet evenly into the nut in the directions of the arrows.
2.The cutter / router bit may be fitted now and the assemblies tightened hard into the chuck body by using a collet wrench.
3.To remove the cutter / router bit, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure.
Please note:
1、Please don't tighten the nut down before insert the cutter / router bit. Or you will damage the collet.
2、You need to tighten the nut down, but not over-tighten. Or you will damage the collet.
Package Include:
1 x ER16A type Clamping Nut
Please compare the goods appearance, shape, size with your original goods before ordering. Thank you very much.
If any questions, pls do not hesitate to contact us. We will get back to you as soon as possible.
BBBMT0180