Straight Shank Tool Holder VER TER Retractable Tapping Floating CNC Lathe Drill

Description

Straight Shank Tool Holder VER TER Retractable Tapping Floating CNC Lathe Drill
Description
Specification
Product Name: C20,C25,C32 tapping tool holder
Material: high quality steel 20CrMnTi
Hardness: > HRC48-55 °
Carburizing depth: > 0.8mm
Surface roughness: > 0.8mm
Size chart
Manual measurement may have errors, please understand!
Features
high quality steel 20CrMnTi manufacturing production, high hardness, product inspection.Exquisite workmanship and stable quality.Once clamping, inside and outside once forming, peer high degree.
How to choose other accessories?
1. With chuck, it is used to clamp the tool.
(Note: Please purchase tapping chuck, the bottom is square)
2. With wire tapping tool, it is used for drilling or milling.
3. With a wrench, it is used to reinforce the nut and clamp the tool.
How to install and use the nut?
The internal oval design of the nut is a normal design. It is recommended to install the chuck according to the following steps:
1. Insert the chuck diagonally from the side of the nut with the smallest oval diameter.
2. Gently push the chuck to make the chuck fully enter the inside of the oval.
3. After installing the chuck inside the nut, the fixture (for example: milling cutter, woodworking knife, etc.) is installed.
4. The disassembly steps are the same. (If there is a milling cutter, please remove the milling cutter first)
The priority is to install the chuck into the nut without falling, and then place it in the tool holder to tighten the nut.
The chuck is a spring chuck, the tighter the screw, the greater the clamping strength.
(According to the video installation method and disassembly)
Package Includes:
Selected variation
For any question please contact us